Sayerlack produce many ranges of special effect coatings designed to give a varying array of textures, effects and colours to create finishes with differing aesthetic appeal. A selection of these coatings and additives are shown here but if you have a particular requirement then we are confident that we will be able to assist you.
Special Effect Coatings
Please note we have provided Technical Data and Safety Data Sheets for all the products listed below. These can be downloaded from the links to the right of each entry.
Metallic Effects |
** Available Gloss Levels | |||
---|---|---|---|---|
IF425073 |
Sayerlack Gold-o-lux Acrylic Silver Topcoat A range of bright gold and silver effect coating that can be used for picture frames, accessories and furniture, designed to be over coated with acrylic lacquers. |
Technical Data Sheet | Safety Data Sheet | |
IF427036 |
Sayerlack 2K Polyurethane Aluminium Topcoat A 2K Polyurethane Aluminium topcoat that is applied in light coats to create a metallic effect that can be over coated with either Polyurethane or Acrylic lacquers. |
Technical Data Sheet | Safety Data Sheet | |
IF425 |
Sayerlack Clear Base for Metallics IF0425 is a clear binder. It can be mixed with gold powder (XT670135, XT670138) or with aluminium powder (XT670136) and this mixture can be stored for many months without any colour change to brown or green. |
Technical Data Sheet | Safety Data Sheet | |
XT6701** |
Sayerlack Metallic Powders for Solvent Based Coatings XT6701** are a range of metal powders which can be used for creating special effects and/or gold, silver and copper coloured paints. |
Technical Data Sheet | Safety Data Sheet | |
XA042573 |
Sayerlack Aluminium Paste for Water Based Coatings XA425 is a metalized paste suitable to obtain special effects and/or silver coatings which may be used with clear or pigmented water based coatings. |
Technical Data Sheet | Safety Data Sheet | |
XA0426** |
Sayerlack Coarse Pastes for Water Based Coatings XA426** is a range of metalized pastes suitable to obtain special effects and/or silver or golden coatings which may be used with clear or pigmented water based coatings. |
Technical Data Sheet | Safety Data Sheet | |
AQVEX012 |
Sayerlack Sparkle Aluminium Powder for Water Based Coatings With the same benefits as the XA42* range but a coarser more sparkle aluminium flake. |
Safety Data Sheet | ||
IFS298436 |
Sayerlack Chrome Silver Effect A bright chrome effect intermediate coat which must be applied onto a gloss base colour and then over lacquered to achieve the ultimate effect. |
Technical Data Sheet | Safety Data Sheet | |
Pearlescent Effects |
||||
IF415013 |
Sayerlack “Mother of Pearl” Effect Topcoat This is a special coating with a mother of pearl effect which shows appearance changes due to the refraction of light. The mother of pearl effect must be over coated with a clear acrylic gloss topcoat, such as TL0339 for best results. |
Technical Data Sheet | Safety Data Sheet | |
IF422073 |
Sayerlack Flash Pearl Effect Topcoat A polyurethane topcoat containing semi-transparent iridescent substances of fairly large particle size. Application over pigmented primers or pigmented matt topcoats creates a glittering metallic effect that is more pronounced than that produced by IF0427 (metal finish effect). |
Technical Data Sheet | Safety Data Sheet | |
IF427018 |
Sayerlack 2K Mica Pearl Topcoat A 2K Polyurethane mica pearl topcoat that is applied in light coats to create a pearl effect that can be over coated with either Polyurethane or Acrylic lacquers. |
Technical Data Sheet | Safety Data Sheet | |
Crackle Effects |
||||
IF490000 |
Sayerlack Clear Crackle Topcoat (Tintable) IF490 products are crackle effect topcoat coatings. They must be applied thinned onto nitrocellulose basecoats and/or topcoats after about 4 hours without sanding. The crackle effect appears during the drying stage and is enhanced by a suitable contrast between the colour of the basecoat and the colour of the topcoat. |
Technical Data Sheet | Safety Data Sheet | |
SU220 |
Sayerlack Clear Cellulose Crackle Basecoat (Tintable) A clear nitrocellulose basecoat that may be tinted to a range of colours for use as a crackle basecoat with the IF490 topcoat range. |
Technical Data Sheet | Safety Data Sheet | |
XA204 |
Sayerlack Water Based Crackle Effect A water based crackle basecoat which when over coated with water based topcoats produces a crackle appearance. |
Technical Data Sheet | Safety Data Sheet | |
Marble Effects |
||||
IF411** |
Sayerlack Metal Marble Stains A range of metal marble colours which may be used alone or with combination of XM8000 stains to create a low film weight product which can be dissolved and manipulated to create marble effects. |
Technical Data Sheet | Safety Data Sheet | |
XM8000** |
Sayerlack Universal Stain Concentrates (May be used for marble effects) A range of universal dyes which can be intermixed or used alone as per the IF411 range to create marble effects on a suitably prepared and coated substrate. |
Technical Data Sheet | Safety Data Sheet |